News

Posts Picture

Polishing and Quality Control Training

9 September 2022

Our Senior Expert Viktor Öcal focused on “Quality Control”, the most important step in jewellery production, in the Polishing & Quality Control training held on 20-24 June 2022. During the training, the participants gained experience in Quality Control while increasing their competence in Polishing.

Posts Picture

Hand-Design Training

19 August 2022

The Hand Design Training given by Maria Grazia Rodi, Senior Expert and Designer from the European Design Institute Milano, was held between 08-19 August. At the end of the 10-day training, the participants turned their designs into collections and the training ended with the presentation of participation certificates.

Posts Picture

3D Modelling Training

5 August 2022

The training given by 3D Modelling trainer, Senior Expert Mehmet Pekin was held between 1-5 August with the participation of SME representatives. As a result of the training, in which the design process and different drawing techniques were explained practically, the participants improved their jewellery design capacities and created original and modern designs.

Posts Picture

Semi Precious Stone Cutting Training

29 July 2022

Semi-Precious Stone Cutting Training given by our Senior Specialist Viktor Öcal was held on 25-29 July 2022. In the training, the participants completed the practical training by examining the Carving Method in detail.  

Posts Picture

Hand-Design Training

29 July 2022

Our Senior Expert Derya Alantor Aslan, under the tutelage of our Senior Expert Derya Alantor Aslan, created new designs by examining Gothic architecture between 25-29 July in the Hand Design training, which aims to improve the skills of SMEs to create new designs.

Posts Picture

Polishing and Quality Control Training

24 June 2022

Our Senior Expert Viktor Öcal focused on “Quality Control”, the most important step in jewellery production, in the Polishing & Quality Control training held on 20-24 June 2022. During the training, the participants gained experience in Quality Control while increasing their competence in Polishing.      

Posts Picture

Polishing and Quality Control Training

24 June 2022

Our Senior Expert Viktor Öcal focused on “Quality Control”, the most important step in jewellery production, in the Polishing & Quality Control training held on 20-24 June 2022. During the training, the participants gained experience in Quality Control while increasing their competence in Polishing.    

Posts Picture

Hand-Design Training

17 June 2022

Hand Design level up training, which aims to improve the skills of SMEs to create new designs, was held between 13-17 June 2022 under the training of our Senior Expert Derya Alantor Aslan.

Posts Picture

3D Modelling Training

13 May 2022

The training, given by 3D Modelling trainer, Senior Expert Mehmet Pekin, was held with the participation of 24 SME representatives. As a result of the training, in which the design process and different drawing techniques were explained practically, the participants improved their jewellery design capacities and created original and modern designs. . We would like […]

Posts Picture

Opening of the Laboratory and Assay House of the Kahramanmaraş Gold and Jewellery Centre

25 March 2022

The Opening Ceremony Gemology Laboratory and Setting House of the Kahramanmaraş Gold and Jewellery Centre, was held with the presence of Mr. Mustafa VARANK, Minister of Industry and Technology, and Ambassador Nikolaus MEYER-LANDRUT, Head of the European Union Delegation to Turkey.

Posts Picture

Stone Setting Techniques Training

18 March 2022

Stone Setting Techniques Training given by Senior Expert Viktor Öcal for Kahramanmaraş Gold and Jewellery Centre SMEs was held between 14-18 March 2022. The participants, who received hands-on training on stone setting, improved their capacities by providing gains against different techniques in many subjects such as placing the stone in the nest and paying attention […]

Posts Picture

Corporate Social Responsibility and Gender Equality and Coaching Program

21 February 2022

The very first Coaching Service was held under the mentorship of Ms. Ebru Hanbay Çakır on Corporate Social Responsibility and Gender Equality.

Posts Picture

Kahramanmaraş Gold and Jewellery Centre Assay House Operational Training

18 February 2022

The Assay House Operational training given by Senior Expert Cemil Doğan and Junior Expert Merve Özkaya was given to the staff of the Assay House, and thanks to the training, they developed their capacities in areas such as Assay analysis process, sampling, acid preparation, boiling the samples in acid.

Posts Picture

3D Modelling Rhino Training by 3D Modelling Expert Nicolas Carnelli

18 February 2022

The training, given by 3D Modeling Senior Expert Nicolas Carnelli, was held with the participation of 22 SME representatives. As a result of the training, in which the design process and different drawing techniques were explained practically, the participants, who developed their jewelery design capacities, also presented original and modern designs. We thank all our […]

Posts Picture

Second B2B Event

10 February 2022

In Kahramanmaraş, the second of the “Business to Business Meetings”, which was planned to bring together the manufacturing SMEs operating in the jewelry sector with their international potential suppliers, customers and business partners, was held on February 8-9, 2022. The meetings held within the scope of Kahramanmaraş Gold and Jewellery Centre Project were held between […]

Posts Picture

The Centre’s First Mentoring Programme is about to start!

4 February 2022

The Centre’s First Mentoring Programme is about to start! For the first Programme focused on “Corporate Social Responsibility and Gender Equality” applications are opened for every SMEs at the Kahramanmaraş Gold and Jewellery Centre.For your applications, you may contact Kahramanmaraş Gold and Jewellery Centre or our Technical Assistance Team.

Posts Picture

Hand-Design Training for Centre’s SMEs with Mrs. Maria Grazia Rodi from European Institute of Design in Milano

7 January 2022

Senior Jewellery Hand Design Trainer Mrs. Maria Grazia Rodi performed 5-days long Jewellery Hand Design Training for Centre’s SMEs. We thank so much to our Expert and SMEs participated to the training.

Posts Picture

Hand-Design Training

4 January 2022

55 hours of Hand-Design Training given by Senior Expert Derya Aslan Alantor was held between 28 March-1 April. We would like to thank our SMEs for their valuable participation for their interest.

Posts Picture

Our Trainings are on the way!

19 December 2021

As part of the Kahramanmaraş Gold and Jewellery Centre project, trainings on Hand design, Gemology, 3D Modeling and 3D Prototyping, Setting, General Manufacturing will be provided for our SMEs. You may contact Kahramanmaraş Gold and Jewellery Centre or Technical Assistant Team for applications.

Posts Picture

Opening Ceremony Part II

10 December 2021

Within the scope of the Kahramanamraş Gold and Jewellery Centre Project, Second Part of the Opening Ceremony was carried out within the participation of 400 SMEs. During the 5-days event, 400 SMEs paid a visit to Design and 3D Modelling Unit of the Centre.

Posts Picture

Competitive Sectors Programme Experience Sharing and Networking Event

18 November 2021

Kahramanmaraş Gold and Jewellery Centre Project was selected among the most successful projects during the Experience Sharing and Networking Event organized within the scope of the Competitive Sectors Programme. Ministry of Industry and Technology Mustafa Varank presented the award to President of Chamber o Kahramanmaraş Jeweller Mr. Hacı Mustafa Öz.

Posts Picture

Mid-Term Evaluation Meeting and 3rd Steering Committee Meeting

25 October 2021

Within the scope of the Kahramanamraş Gold and Jewellery Centre Project, Mid-Term Evaluation Meeting and the Third Steering Committee Meeting was held with the particpation of Project local stakeholders and the representatives of the Contracting Authority from the Ministry of Industry and Technology. The presentation regarding the activities carried out and the activities for the […]

Posts Picture

Cupellation Training with Senior Expert Çınar Küçükçoban and Yunus Yıldız

22 October 2021

Practical Cupellation Training was held under the supervision of Senior Expert Mrs. Çınar Küçükçoban and Mr. Yunus Yıldız to increase the capacity of the Assay House services of the Centre.

Posts Picture

Participation to İstanbul Jewelry Show October 2021 Edition

10 October 2021

Kahramanmaraş Gold and Jewellery Centre participated to İstanbul Jewelry Show Fair and was of one the front lines. The Stakeholders of Kahramanmaraş Gold and Jewellery Centre met up with Jewellery sector representatives during İstanbul Jewelry Show October 2021 edition.

Posts Picture

Study Visit to Italy

23 September 2021

Kahramanmaraş Gold and Jewellery Centre Project Stakeholders came together for for 4-days study visit in Italy and paid a visit to LABIGEM (accredited laboratory), For.Al Jewellery School, Divalenza Consortium and SMEs.

Posts Picture

Diamond Grading Course

17 August 2021

Senior Expert Mr. Deniz Tanju Yılmaz carried out training Diamond Grading Course which is internationally certified.

Posts Picture

Training on Setting with Precious Stone Master Mr. Viktor Öcal

10 July 2021

Precious Stone Expert and Master Trainer Mr. Viktor Öcal carried out 5-days training on setting techniques.

Posts Picture

B2B Meetings

8 July 2021

Representatives of BTT Italy, Legor and LEM Industries one of the leading companies in the sector, came together for B2B business meetings with SMEs in Altınşehir.

Posts Picture

Focus Group Meeting on Training Need Analysis

16 June 2021

Kahramanmaraş Goldsmiths came together at the Focus Group Meeting held within the scope of the Project and discussed the Training Needs Analysis of the Sector.

Posts Picture

Design Trainings with 3D Modelling Expert Mr. Mehmet Pekin

29 April 2021

Kahramanmaraş Goldsmiths came together at the Focus Group Meeting held within the scope of the Project and discussed the Training Needs Analysis of the Sector.

Posts Picture

News from Us

26 January 2021

You can follow the developments in our institution here.

Posts Picture

Manufacturing Process with International Core Expert Alessandra Cherchi

26 November 2020

Training of Trainers About Jewellery Manufacturing Process with International Core Expert Alessandra Cherchi.

Posts Picture

Training of Trainers about free hand jewellery design with Expert Deyra Alantor

18 October 2020

Training of Trainers about free hand jewellery design with Expert Deyra Alantor

Posts Picture

Since June 2020…

26 June 2020

Thanks to the Delegation of European Union to Turkey, Competitive Sectors Programme and Ministry of Industry and Technology for their contributions.